Adventures In Audio

What's the difference between Earth, ground and screen?

by David Mellor

Do you know what the difference is between Earth, ground and screen? Are they all the same, or does the way in which they are applied matter?

Audio equipment, analog and digital, works using varying voltages. A voltage is always measured between two points. It is meaningless to say that any one point in a circuit is at a certain number of volts, unless the reference point is also quoted.

For mains-powered equipment, that reference point is always Earth - capitalized because it is the planet Earth. The Earth is so big in comparison to any source of electricity - even the Hoover Dam, that all electrical currents that flow into it average out and the Earth's voltage is taken to be the ultimate zero volts reference.

So any voltage inside mains-powered equipment can be measured and quoted with reference to Earth. The chassis of the equipment will be connected to Earth to make sure it is at zero points, and the circuit will also be connected to Earth in order to supply the necessary zero volts reference to all of its elements, either through the chassis or separately.

Audio Masterclass Video Courses

Learn FAST With Audio Masterclass Video Courses

With more than 900 courses on all topics audio, including almost every DAW on the market, these courses are your fast track to audio mastery.
Get a library pass for all 900+ courses for just $25.

'Ground' is often used as a synonym for Earth.

The Audio Masterclass Music Production and Sound Engineering Course


Ready to take your recording to the next level? Full online course leading to your Audio Masterclass certificate on successful completion.

Connection to Earth is usually via the earth of the mains socket. This in turn is electrically connected to Earth, often through the plumbing system. However if this option is not available then a copper spike can be driven into the ground to provide the Earth connection. Whatever method is used, earthing or grounding can be more effective or less effective - a copper spike in dry soil or sand will not make a good connection to Earth.

A 'screen' is a metal sheath around a signal-carrying conductor. The idea is that any interference that might otherwise work its way into the conductor will be dispersed in the screen before it has chance to get through. This works a whole lot better if the screen is connected to Earth, so interference currents are swiftly and efficiently carried away.

Equipment that is mains-powered but not itself earthed at the mains connector nevertheless finds its earth through the other equipment to which it is connected. If used alone, then it is not earthed, but interference is dispersed within the metal parts of the chassis of the equipment. The same applies to battery-powered equipment.

Tuesday October 31, 2006

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

David Mellor

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Adventures In Audio.

More from Adventures In Audio...

An interesting microphone setup for violinist Nigel Kennedy

Are you compressing too much? Here's how to tell...

If setting the gain correctly is so important, why don't mic preamplifiers have meters?

The Internet goes analogue!

How to choose an audio interface

Audio left-right test. Does it matter?

Electric guitar - compress before the amp, or after?

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue