Adventures In Audio

What is a channel strip? Why should you use one?

by David Mellor
FREE EBOOK DOWNLOAD ► LEARN AUDIO ONLINE ►

The channel strip dates back to the days of the analog mixing console, like this one...

Trident 78 analog mixing console

You can see the channel strips on the left. Each one has a microphone input and also a line-level input. These two inputs are either/or - you can't use them both at the same time.

Each channel strip, or we can just call it a channel, on a large-scale console, has the following features (not all consoles have all features)...

Audio Masterclass Video Courses

Learn FAST With Audio Masterclass Video Courses

With more than 900 courses on all topics audio, including almost every DAW on the market, these courses are your fast track to audio mastery.
Get a library pass for all 900+ courses for just $25.

You can use all of these controls while recording, or you can leave them in their neutral settings while you record and only set them when you mix.

If you use the EQ and compressor, for example, while you record, the settings are 'baked in' to your recording.

If you record 'flat', meaning with the controls switched out or neutral, then you have complete flexibility to set them as you please during the mix.

It's a more versatile way of working to leave EQ, compression, etc until the mix. But sometimes you know exactly how something should sound and it's best to make that decision when you record.

Standalone hardware channel strips

At some point in history, a wise person decided that it would be useful to mount a mixing console channel strip in a box of its own. So you could for instance take a Neve channel strip to any studio and have the Neve sound available. This would be on just one channel, or a pair if you had boxed up two, but you can use them multiple times as you record overdubs. You can also use them on one or two instruments or vocals while you mix. Or if you have a pair of channel strips, you can process the whole mix through them.

At some later time, audio equipment manufacturers started making their own channel strips, completely independent of the mixing console.

An example of a hardware channel strip

Here we have the Neve 8801 channel strip, which is a repackaging of the electronics from a single channel of their 88R mixing console.

Neve 8801 channel strip

If we scan this from left to right, these are the main functions...

What's missing that you would also find on an actual mixing console channel are the auxiliary sends, pan, mute, and solo. These functions are not relevant to a standalone channel strip. They could be if you had a number of channel strips, but then surely it would be easier just to have the whole console.

As a single-channel hardware unit you can use it to process any instrument or voice as you record, but clearly only one channel at a time.

You can also use it to process one channel while you mix.

It is also possible to process individual tracks in your DAW (digital audio workstation) and bounce them back into the session. You can process as many tracks as you like, one by one. You will have to account for the small amount of latency (time delay) in the round trip out of and back into your DAW.

Plug-in channel strips

Software channel strips can mimic real hardware, or they can be complete works of invention that don't exist in the physical world. This one, from SSL, clearly has the SSL look and one can assume that it has something of the sound quality of a physical SSL console.

SSL Channel Strip 2 plug-in

What we see here are the following functions...

The Audio Masterclass Music Production and Sound Engineering Course

LEARN AUDIO ONLINE

Ready to take your recording to the next level? Full online course leading to your Audio Masterclass certificate on successful completion.

But there are features here that you won't find on a hardware channel strip...

Firstly there are presets, and of course, you can store your own settings. With a hardware channel strip, you would have to write down your favourite settings, or store them as a note on your phone. That really isn't too much of a hardship, but clearly, the plug-in is going to be faster, and it's practical to create a hundred of your own presets if you like.

Secondly, you can change the order of the processing. Some hardware channel strips allow this, but a plug-in can always be more versatile. The side chain of the dynamics section is extremely flexible too.

One interesting point about the plug-in channel strip is that it is almost always used while mixing, not during recording. The reason for this is that DAWs make this easy to do. If you want to record through the channel strip then you can route your input signal to an auxiliary channel with the channel strip plug-in set up as an insert. Then route that auxiliary channel to an audio channel. Hit record and you'll capture all of the wonderful channel-strip-ness with filters, EQ, and dynamics set however you please. And that will be baked into your recording.

Why use a channel strip plug-in when you can use individual plug-ins?

Yes of course you can use a plug-in for filters, another for EQ, another for compression, another for expansion or gating. They can each be from a different software developer. You have complete freedom to use any plug-ins that you have installed in your system. That way you have maximum flexibility.

You also have maximum complexity. Sometimes it's easier just to use one plug-in that can control all of the major processes.

Also, if you use the SSL channel strip, or any plug-in that emulates an analog mixing console, you can expect to get the 'analog sound'. There is such a thing, and you'll mostly find it if you push the levels hard. Used with care and tastefulness, it can help bind, or glue, together all of the individual instruments and vocals in your mix.

Summary

A channel strip is a great way of presenting the most-used functions in audio in a single box or a single plug-in. You can also get the 'analog sound' in your recording and mix. Hardware or software, a channel strip is a useful addition to anyone's studio setup.

Tuesday August 17, 2021

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

David Mellor

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Adventures In Audio.

More from Adventures In Audio...

An interesting microphone setup for violinist Nigel Kennedy

Are you compressing too much? Here's how to tell...

If setting the gain correctly is so important, why don't mic preamplifiers have meters?

The Internet goes analogue!

How to choose an audio interface

Audio left-right test. Does it matter?

Electric guitar - compress before the amp, or after?

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue

#